Our Products

journey_start_thumbnail

SonaCoat p

Specification

  • Range: Steel/Iron (F): 0 - 2000 μ m (0- 80 mils) Aluminium (N): 0 - 2000 μ m (0 - 80 mils) (F)
  • Accuracy: ± 5 μ m + 5 % of reading ± 0.5 mils + 5 % of reading
  • Resolution: 5 μ m or <1% of reading 0.5 mils or <1% of reading
  • Display: 4-digit alphanumeric. Height 10 mm (0.4”)
  • Minimum Measuring Area: 40mm x 40mm (1.6” x 1.6”)
  • Minimum Substrate Thick- ness: F: 0.75 mm (30 mils) N: 0.25 mm (10 mils)
  • Calibration: not needed; factory calibrated

  • The Sonacoat P provides fast, non-destructive, accurate coating measurements on steel and non-ferrous metals.

    It is not only paintwork thickness and other coatings you can measure. You can also obtain valuable information concerning the coating structure, such as paint top coats or body fillers. When measured thickness value clearly exceeds the standard paintwork thickness, this would indicate the use of filler material for repair work or repainting. Ideal for car dealers, paint shops and inspectors.