Together We CanEnsure Safety
Together We CanEnsure Safety
Fixed Gas Detector
Transmitter Relay Control TR98
Sensor transmitters typically provide a 4-20 mA output, and this signal can be fed to a controller which provides alarm processing and relay contacts to trip alarm horns/lights, activate ventilation motors, etc. However, some applications require relay contacts to be located at the sensor transmitter itself. For these applications, the TR-98M Transmitter Relay provides a simple solution. Even though it is designed for IST transmitters, it will also work with other transmitters which produce a 4-20 mA signal.
Read More
S2K Flexible Sampling System
The IST model S2K Sampling System is a flexible sampling system which is designed to condition the sample as required. This system not only brings the sample to the sensor, in many cases, it is the only viable solution to difficult applications.
Read More
MP Series Stationary Instruments
The MP202 and MP204 are wall-mounted, microprocessor-based control units housed in weatherproof enclosures. The MP202 is a two-channel controller which can be used for 1 or 2 sensor channels, while the MP204 is a four-channel controller which can be used for up to 4 sensor channels
Read More
Multi-Function Process Controller
The T-Gage V series encompasses a range of hand held ultrasonic instruments that are specifically designed to measure the remaining wall thickness of primary steel structures.
Read More
MP220EX Explosion Proof
The MP220EX is a two channel, explosion-proof, wall mounted, control unit rated for use in Class 1, Div. 1, Groups C & D (B optional) hazardous areas. Operation via magnetic wand allows the unit to be operated without opening the cover, thereby ensuring that hazardous areas do not require declassification.
Read More
LC-100 Single-Channel Control Unit
The LC-100 is a stationary, single-channel, wall-mounted control unit for the detection of over 150 different toxic and combustible gases for area air quality and safety applications. The LC-100 can be used with many sensor technologies including Solid State, Electrochemical, Catalytic Bead, Infra-red, and more!
Read More
SM95 STANDARD TRANSMITTER
SM95 sensor transmitter with explosion-proof enclosure , operating voltage 14-24VDC. 4-20mA linear output , by adjusting potentiometer calibration chassis. When SM95 is connected with the control system , automatic calibration can be carried out , no need to adjust the potentiometer.
Read More
IQ Intelligent Transmitter
The model 4-20 IQ is a microprocessor based intelligent sensor transmitter. It comes equipped with a digital display which provides a local reading of the gas concentration. Operating on 14-24 VDC power, it provides a linear 4-20 mA output proportional to the gas concentration, and is housed in an explosion-proof casing.
Read MorePage No.
Our Valuable Clients
